We’ve all done a fair bit of sofa surfing over the Christmas period and you may not have been entirely happy with the comfort afforded you. Some of you may have even bought a new settee in time for Christmas but may discover that the bounce in your cushions isn’t really all that great.
Foam has a shelf life and although it will last many years, eventually it will start to deteriorate and crumble and you will need to think about replacement cushions.
Many manufacturers of synthetic sofa cushions now also use only a thick wadding in the covers. A sofa with foam inserts will not be bought at a discount sofa sale because they cost a lot more to produce. Your wadding cushions will seem fine for a few weeks but very quickly you will notice that they sag and squash into nothing because the polyester will not bounce back to its original shape. To rectify this we offer a bespoke service that will make your old or new settee bounce back in to life. We cut foam exactly to the size and shape of the cushion cover and then wrap it in thick wadding. In this way you get all of the bounce and shape retention from the foam with the addition of softness and comfort from the wadding. To finish up we wrap the whole squashy sandwich in stockinette for easing your cushions back into the covers – without a hot sweaty battle.
Is your foam still ok but your covers are looking a little tired? Pop in and talk to us about renewing your existing sofa, especially if it is an inherited or memorable piece. We offer a full and bespoke upholstery and re-cover service from our workshops in The Long Room at Livingstone Textiles,Bridport Dorset.
If you would like information on sofa cushions please contact us and we will be happy to give advise or a quote.
We supply foam to renew all kinds of seats, cushions ,beds and campervans. The foam we supply can be made super comfy by adding a layer of thick quilters wadding. This softens the edges and corners of the foam and gives a more rounded appearance to the cushion when the covers are back on. We often do this in house for our customers and we then cover the wadding with a layer of thin stockinette to help ease the cushions back into their covers . Foam has a tendency to grip the underside of many fabric covers and it can be a bit of a battle getting them back on to the foam, sometimes it takes three of us to do it in the shop and it can be quite entertaining to watch as well!
Here we will set out step by step a guide to covering your own foam cushions. All of the materials used in the photographs can be bought from our shop and we can also send them by mail order. Contact us to place your order over the phone.
Firstly, lay your foam out on the stockinette and cut out pieces for the top, bottom and side
Next you need to put the foam on some newspaper and spray with contact adhesive. Remeber to do this in a well ventilated area. Once you have sprayed on the glue, carefully line up your wadding pieces and lay gently in place, you only get one shot at this so take your time as it sheds if you try to pull it off and start again. Press down firmly. We do the top and bottom first then cut a long strip, spray glue it then roll the edges along it in one piece.
Once all the wadding is in place, cut a generous piece of stockinette. It stretches to unbelievable sizes! Open one end of the stockinette and slide the cushion inside then neatly roll the edges into little seams that sit along the edges of the cushion and pin in place with long quilters pins. This way you don’t end up with big lumps on the sides. Carefully whip stitch along the seam, catching the rolled seam to the cushion using a long darner needle and a good quality thread. Repeat the whole process the other end.
Your foam is now ready to be put back inside the cover and sat on. If you have any further questions on how to do this, you can contact the team at Livingstones Bridport on 01308456844