Posted on

How To……put Wadding & Stockinette on to Foam

We supply foam to renew all kinds of seats, cushions ,beds and campervans.  The foam we supply can be made super comfy by adding a layer of thick quilters wadding.  This softens the edges and corners of the foam and gives a more rounded appearance to the cushion when the covers are back on.  We often do this in house for our customers and we then cover the wadding with a layer of thin stockinette to help ease the cushions back into their covers . Foam has a tendency to grip the underside of many fabric covers and it can be a bit of a battle getting them back on to the foam, sometimes it takes three of us to do it in the shop and it can be quite entertaining to watch as well!

Here we will set out step by step a guide to covering your own foam cushions.  All of the materials used in the photographs can be bought from our shop and we can also send them by mail order. Contact us to place your order over the phone.

Firstly, lay your foam out on the stockinette and cut out pieces for the top, bottom and side

IMG_0111

IMG_0112

 

 

 

 

 

 

 

 

Next you need to put the foam on some newspaper and spray with contact adhesive.  Remeber to do this in a well ventilated area.  Once you have sprayed on the glue, carefully line up your wadding pieces and lay gently in place, you only get one shot at this so take your time as it sheds if you try to pull it off and start again.  Press down firmly.  We do the top and bottom first then cut a long strip, spray glue it then roll the edges along it in one piece.

IMG_0114

 

 

 

 

 

 

IMG_0117

 

 

 

 

 

 

 

 

IMG_0115

 

 

 

 

 

 

 

 

Once all the wadding is in place, cut a generous piece of stockinette.  It stretches to unbelievable sizes!  Open one end of the stockinette and slide the cushion inside then neatly roll the edges into little seams that sit along the edges of the cushion and pin in place with long quilters pins.  This way you don’t end up with big lumps on the sides.  Carefully whip stitch along the seam, catching the rolled seam to the cushion using a long darner needle and a good quality thread.  Repeat the whole process the other end.

IMG_0119

 

 

 

 

 

 

 

 

IMG_0121

 

 

 

 

 

 

 

 

Your foam is now ready to be put back inside the cover and sat on.  If you have any further questions on how to do this, you can contact the team at Livingstones Bridport on 01308456844